 |
||||||||||||
|
FLURO-No. GA 05 |
||||||||||||
|
||||||||||||
| Rod Ends Series K - Standard |
Series GA
Rod Ends with male thread regreasable through the housing with flush type grease fitting
» CAD Data |
 |
| Size (D H7) |
B | M | A | F | L | O | G | GL | Static load Co kN |
Dynamic load C kN |
Limiting speed rev/min |
Pivoting Angle α (°) |
Weight g |
|
| 51) | 8 | 6 | 18 | 33 | 42 | 7,7 | M 5 | 19 | 4,3 | 2,5 | 900 |  |
13 | 13 |
| 6 | 9 | 6,75 | 20 | 36 | 46 | 8,9 | M 6 | 21 | 6 | 3,2 | 760 | 13 | 20 | |
| 8 | 12 | 9 | 24 | 42 | 54 | 10,4 | M 8 | 25 | 11 | 5,4 | 620 | 14 | 33 | |
| 10 | 14 | 10,5 | 28 | 48 | 62 | 12,9 | M 10 | 28 | 17,4 | 7,5 | 500 | 13 | 56 | |
| 12 | 16 | 12 | 32 | 54 | 70 | 15,4 | M 12 | 29 | 25,5 | 10 | 450 | 13 | 87 | |
| 14 | 19 | 13,5 | 36 | 60 | 78 | 16,8 | M 14 | 38 | 24,5 | 13 | 360 | 16 | 129 | |
| 16 | 21 | 15 | 42 | 66 | 87 | 19,3 | M 16 | 40 | 36,5 | 16 | 350 | 15 | 189 | |
| 18 | 23 | 16,5 | 46 | 72 | 95 | 21,8 | M 18x1,5 | 44 | 43 | 19,5 | 320 | 15 | 267 | |
| 20 | 25 | 18 | 50 | 78 | 103 | 24,3 | M 20x1,5 | 47 | 49,5 | 23,5 | 280 | 14 | 348 | |
| 22 | 28 | 20 | 54 | 84 | 111 | 25,8 | M 22x1,5 | 51 | 57 | 29 | 250 | 15 | 443 | |
| 25 | 31 | 22 | 60 | 94 | 124 | 29,6 | M 24x2 | 57 | 68 | 35 | 230 | 15 | 600 | |
| Materials: | |
| Housing: | Up to size 12 turned from free-cutting steel to 11SMn30+C, 12L13, galvanized |
| From size 14 forged from heat-treated steel to C22, forged, galvanized |
|
| Insert: | Special brass to CuZn38Al1 |
| Ball: | Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished |
| 1) Without lubrication fitting | |
 |
||
|
FLURO-No. GI...40-Cetop M42x2 |
||
|
 |
||
|
FLURO-No. GI...50-Cetop M48x2 |
||
|
FLURO®-Gelenklager GmbH
Siemensstrasse 13
72348 Rosenfeld, Germany
0049 7428 / 9385-0
info[at]fluro.de
Contacts:
National / International