Gelenklager Gelenkköpfe Spherical Plain Bearings Rod Ends - Gelenkkoepfe

DE
EN

GIRS05RDruck

FLURO-No. GIRS 05R

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
11,8	3,3	1200	18 / 0,04

GIRS03RDruck

FLURO-No. GIRS 03R

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
8	1,8		6 / 0,013
nicht nachschmierbar / without lubrication fitting

GIRS40Druck

FLURO-No. GIRS 40

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
235	116	290	2770 / 6,107

Rod Ends Series K - Stainless - Requiring maintenance

Series GIRS..R

Rod Ends series K with female threads regreasable through the housing with flush type grease fitting

For use in corrosive environments

GIRS-R-Drawing

Size (D H7)	B	M	A	F	L	K	J	O	SW	G	GL	Static load C_o kN	Dynamic load C kN	Limiting speed rev/min		Pivoting Angle α (°)	Weight g
3¹⁾	6	4,5	14	21	28	6,5	5	5,1	5,5	M 3	10	8	1,8			14	6
5	8	6	18	27	36	11	9	7,7	9	M 5	10	11,8	3,3	1200		13	18
6	9	6,75	20	30	40	13	10	8,9	11	M 6	12	13,1	4,3	1500		13	27
8	12	9	24	36	48	16	12,5	10,4	13	M 8	16	20,7	7,1	1200		14	46
10	14	10,5	28	43	57	19	15	12,9	17	M 10	20	28,3	10	1000		13	76
12	16	12	32	50	66	22	17,5	15,4	19	M 12	22	34,5	13,5	860		13	115
14	19	13,5	36	57	75	25	20	16,8	22	M 14	25	39,5	17	750		16	170
16	21	15	42	64	85	27	22	19,3	22	M 16	28	60,5	21,5	660		15	230
18	23	16,5	46	71	94	31	25	21,8	27	M 18x1,5	32	73	26	600		15	320
20	25	18	50	77	102	34	27,5	24,3	32	M 20x1,5	33	83	31,5	540		14	415
22	28	20	54	84	111	37	30	25,8	32	M 22x1,5	37	100	38	500		15	540
25	31	22	60	94	124	42	33,5	29,6	36	M 24x2	42	118	47,1	440		15	750
30	37	25	70	110	145	50	40	34,8	41	M 30x2	51	155	64	370		17	1130
35	43	28	80	125	165	58	46	37,7	50	M 36x2	56	191	80	330		19	1600
40	49	35	90	142	187	69	57	44,2	60	M 42x2	60	235	116	290		16	2770

Materials:
Housing:	Stainless steel to 1.4057, forged, polished Size 40 consist of stainless steel 1.4057, turned
Insert:	Special high strength bronze to CuSn8, turned
Ball:	Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished
On request:	Other tribological pairing possible

This series is also available sealed (-2RS) or with threaded bolt (-BO).

Cetop connections see G-CETOP

¹⁾ Without lubrication fitting

Page 131 of 159

FLURO^®-Gelenklager GmbH
Siemensstrasse 13
72348 Rosenfeld, Germany
0049 7428 / 9385-0
info[at]fluro.de

Contacts:
National / International

Legal notes:

Data protection

Newsletter:

Subscribe to our newsletter

>> Subscribe here

X

Right Click

No right click