Gelenklager Gelenkköpfe Spherical Plain Bearings Rod Ends - Gelenkkoepfe

DE
EN

GISW06Druck

FLURO-No. GISW 06

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
8,9	9,3	530	27 / 0,06
nur für kurzzeitige Umdrehungen geeignet / only for short-term revolutions recommended

GISW05Druck

FLURO-No. GISW 05

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
8	7,5	600	18 / 0,04
nur für kurzzeitige Umdrehungen geeignet / only for short-term revolutions recommended

GARS40RDruck

FLURO-No. GARS 40 R

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
235	116	290	2570 / 5,666

Rod Ends Series K - Maintenance-free

Series GISW

Rod Ends with female thread and PTFE liner

For use at dynamic loads

GISW-Drawing

Size (D H7)	B	M	A	F	L	K	J	O	SW	G	GL	Static load C_o kN	Dynamic load C kN	Limiting speed rev/min		Pivoting Angle α (°)	Weight g
5	8	6	18	27	36	11	9	7,7	9	M 5	10	8	7,5	600		13	18
6	9	6,75	20	30	40	13	10	8,9	11	M 6	12	8,9	9,3	530		13	27
8	12	9	24	36	48	16	12,5	10,4	13	M 8	16	14,1	16,7	420		14	46
10	14	10,5	28	43	57	19	15	12,9	17	M 10	20	19,3	23,4	350		13	76
12	16	12	32	50	66	22	17,5	15,4	19	M 12	22	23,5	32	300		13	115
14	19	13,5	36	57	75	25	20	16,8	22	M 14	25	21	42	260		16	170
16	21	15	42	64	85	27	22	19,3	22	M 16	28	32	52,5	230		15	230
18	23	16,5	46	71	94	31	25	21,8	27	M 18x1,5	32	38,5	64	210		15	320
20	25	18	50	77	102	34	27,5	24,3	32	M 20x1,5	33	44	78	190		14	415
22	28	20	54	84	111	37	30	25,8	32	M 22x1,5	37	53	97	170		15	540
25	31	22	60	94	124	42	33,5	29,6	36	M 24x2	42	62	122	150		15	750
30	37	25	70	110	145	51	40	34,8	41	M 30x2	51	82	168	130		17	1130
35	43	28	80	125	165	58	46	37,7	50	M 36x2	56	101	206	110		19	1600
40	49	35	90	142	187	69	57	44,2	60	M 42x2	60	124	286	100		16	2770
50	60	45	116	160	218	78	65	55,9	65	M 48x2	65	308	485	80		14	5000

Materials:
Housing:	Up to size 12 turned, from free-cutting steel to 11SMn30+C, 12L13, galvanized
	From size 14 forged, from heat-treated steel to C22, M1023, forged, galvanized
	Size 50 turned from heat-treated steel to C45, Aisi 1045, galvanized
Insert:	Free-cutting steel to 11SMn30+C, 12L13, galvanized with PTFE liner bonded to the inner surface
Ball:	Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available on request in some sizes sealed (-2RS) or with threaded bolt (-BO).

Cetop connections see G-CETOP

Please note: The dynamic load "C" of the bearing of some Rod Ends is in some sizes higher than the static load "C_o" of the Rod End.

Page 119 of 159

FLURO^®-Gelenklager GmbH
Siemensstrasse 13
72348 Rosenfeld, Germany
0049 7428 / 9385-0
info[at]fluro.de

Contacts:
National / International

Legal notes:

Data protection

Newsletter:

Subscribe to our newsletter

>> Subscribe here

X

Right Click

No right click