Gelenklager Gelenkköpfe Spherical Plain Bearings Rod Ends

FLURO-No. GASW 06

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
6	9,3	530	20 / 0,044
nur für kurzzeitige Umdrehungen geeignet / only for short-term revolutions recommended

FLURO-No. GASW 05

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
4,3	7,5	600	13 / 0,029
nur für kurzzeitige Umdrehungen geeignet / only for short-term revolutions recommended

FLURO-No. GISW 50

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
308	485	80	5000 / 11,023
nur für kurzzeitige Umdrehungen geeignet / only for short-term revolutions recommended

Rod Ends Series K - Maintenance-free

Series GASW

Rod Ends with male thread and PTFE liner

For use at dynamic loads

Materials:
Housing:	Up to size 12 turned, from free-cutting steel to 11SMn30+C, 12L13, galvanized
	From size 14 forged, from heat-treated steel to C22, M1023, galvanized
	Size 50 turned from heat-treated steel C45, Aisi 1045, galvanized
Insert:	Free-cutting steel to 11SMn30+C, galvanized, 12L13, with PTFE liner bonded to the inner surface
Ball:	Bearing steel 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available on request in some sizes sealed (-2RS) or with threaded bolt (-BO).

Please note: The dynamic load "C" of the bearing of some Rod Ends is in some sizes higher than the static load "C_o" of the Rod End.

Page 115 of 159