| Rod Ends Series K - Stainless - Maintenance-free |
Series GIRSW..R
Rod Ends with female thread and PTFE liner
» CAD Data |
 |
| Size (D H7) |
B | M | A | F | L | K | J | O | SW | G | GL | Static load Co kN |
Dynamic load C kN |
Limiting speed rev/min |
Pivoting Angle α (°) |
Weight g |
|
| 41) | 7 | 5,25 | 14 | 24 | 31 | 9,5 | 7,8 | 6,5 | 8 | M 4 | 12 | 2,5 | 5,1 |  |
14 | 11 | |
| 5 | 8 | 6 | 18 | 27 | 36 | 11 | 9 | 7,7 | 9 | M 5 | 10 | 11,8 | 7,5 | 600 | 13 | 18 | |
| 6 | 9 | 6,75 | 20 | 30 | 40 | 13 | 10 | 8,9 | 11 | M 6 | 12 | 13,1 | 9,3 | 530 | 13 | 27 | |
| 8 | 12 | 9 | 24 | 36 | 48 | 16 | 12,5 | 10,4 | 13 | M 8 | 16 | 20,7 | 16,7 | 420 | 14 | 46 | |
| 10 | 14 | 10,5 | 28 | 43 | 57 | 19 | 15 | 12,9 | 17 | M 10 | 20 | 28,3 | 23,4 | 350 | 13 | 76 | |
| 12 | 16 | 12 | 32 | 50 | 66 | 22 | 17,5 | 15,4 | 19 | M 12 | 22 | 34,5 | 32 | 300 | 13 | 115 | |
| 14 | 19 | 13,5 | 36 | 57 | 75 | 25 | 20 | 16,8 | 22 | M 14 | 25 | 39,5 | 42 | 260 | 16 | 170 | |
| 16 | 21 | 15 | 42 | 64 | 85 | 27 | 22 | 19,3 | 22 | M 16 | 28 | 60,5 | 52,5 | 230 | 15 | 230 | |
| 18 | 23 | 16,5 | 46 | 71 | 94 | 31 | 25 | 21,8 | 27 | M 18x1,5 | 32 | 73 | 64 | 210 | 15 | 320 | |
| 20 | 25 | 18 | 50 | 77 | 102 | 34 | 27,5 | 24,3 | 32 | M 20x1,5 | 33 | 83 | 78 | 190 | 14 | 415 | |
| 22 | 28 | 20 | 54 | 84 | 111 | 37 | 30 | 25,8 | 32 | M 22x1,5 | 37 | 100 | 97 | 170 | 15 | 540 | |
| 25 | 31 | 22 | 60 | 94 | 124 | 42 | 33,5 | 29,6 | 36 | M 24x2 | 42 | 118 | 122 | 150 | 15 | 750 | |
| 30 | 37 | 25 | 70 | 110 | 145 | 50 | 40 | 34,8 | 41 | M 30x2 | 51 | 155 | 168 | 130 | 17 | 1130 | |
| 35 | 43 | 28 | 80 | 125 | 165 | 58 | 46 | 37,7 | 50 | M 36x2 | 56 | 191 | 206 | 110 | 19 | 1600 | |
| 40 | 49 | 35 | 90 | 142 | 187 | 69 | 57 | 44,2 | 60 | M 42x2 | 60 | 235 | 286 | 100 | 16 | 2770 | |
| Materials: | |
| Housing: | Stainless steel to 1.4057, Aisi 431, forged, polished Size 40 turned from stainless steel to 1.4057, Aisi 431 |
| Insert: | Special high strength bronze to CuSn8 with PTFE liner bonded to the inner surface |
| Ball: | Stainless steel to 100Cr6, Aisi 52100, hardened, ground, polished |
| This series is also available on request in some sizes sealed (-2RS) or with threaded bolt (-BO). |
| Cetop connections see G-CETOP |
| 1) Size 4 on request. Housing turned from stainless steel to 1.4305, Aisi 303 |
Please note: The dynamic load "C" of the bearing of some Rod Ends is in some sizes higher than the static load "Co" of the Rod End.