| Rod Ends Series K - Stainless - Requiring maintenance |
Series GARS..R
Rod Ends with male thread regreasable through the housing with flush type grease fitting
» CAD Data |
 |
| Size (D H7) |
B | M | A | F | L | O | G | GL | Static load Co kN |
Dynamic load C kN |
Limiting speed rev/min |
Pivoting angle α (°) |
Weight g |
|
| 31) | 6 | 4,5 | 14 | 26 | 33 | 5,1 | M 3 | 15 | 7 | 1,8 |  |
14 | 6 | |
| 51) | 8 | 6 | 18 | 33 | 42 | 7,7 | M 5 | 19 | 6,2 | 3,3 | 13 | 13 | ||
| 6 | 9 | 6,75 | 20 | 36 | 46 | 8,9 | M 6 | 21 | 8,8 | 4,3 | 1500 | 13 | 20 | |
| 8 | 12 | 9 | 24 | 42 | 54 | 10,4 | M 8 | 25 | 16,1 | 7,1 | 1200 | 14 | 33 | |
| 10 | 14 | 10,5 | 28 | 48 | 62 | 12,9 | M 10 | 28 | 25,5 | 10 | 1000 | 13 | 56 | |
| 12 | 16 | 12 | 32 | 54 | 70 | 15,4 | M 12 | 32 | 34,5 | 13,5 | 860 | 13 | 87 | |
| 14 | 19 | 13,5 | 36 | 60 | 78 | 16,8 | M 14 | 38 | 39,5 | 17 | 750 | 16 | 129 | |
| 16 | 21 | 15 | 42 | 66 | 87 | 19,3 | M 16 | 40 | 60,5 | 21,5 | 660 | 15 | 189 | |
| 18 | 23 | 16,5 | 46 | 72 | 95 | 21,8 | M 18x1,5 | 44 | 73 | 26 | 600 | 15 | 267 | |
| 20 | 25 | 18 | 50 | 78 | 103 | 24,3 | M 20x1,5 | 47 | 83 | 31,5 | 540 | 14 | 348 | |
| 22 | 28 | 20 | 54 | 84 | 111 | 25,8 | M 22x1,5 | 51 | 100 | 38 | 500 | 15 | 443 | |
| 25 | 31 | 22 | 60 | 94 | 124 | 29,6 | M 24x2 | 57 | 118 | 47 | 440 | 15 | 600 | |
| 30 | 37 | 25 | 70 | 110 | 145 | 34,8 | M 30x2 | 71 | 155 | 64 | 370 | 17 | 1030 | |
| 35 | 43 | 28 | 80 | 125 | 165 | 37,7 | M 36x2 | 73 | 191 | 80 | 330 | 19 | 1600 | |
| 40 | 49 | 35 | 90 | 142 | 187 | 44,2 | M 42x2 | 78 | 235 | 116 | 290 | 16 | 2570 | |
| Materials: | |
| Housing: | Stainless steel to 1.4057 Size 40 consist of stainless steel 1.4057, turned |
| Insert: | Special high strength bronze to CuSn8 |
| Ball: | Stainless steel1.4034, hardened, ground, polished |
| On request: | Other tribological pairing possible |
| This series is also available on request in some sizes sealed (-2RS) or with threaded bolt (-BO). |
| 1) Without lubrication fitting |