Gelenklager Gelenkköpfe Spherical Plain Bearings Rod Ends

FLURO-No. GLXSW 22

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
162	97	170	270 / 0,595
nur für kurzzeitige Umdrehungen geeignet / only for short-term revolutions recommended

Spherical Plain Bearings Series G - Maintenance-free

Series GE..FW (-2RS)

Spherical Plain Bearings series G, tribological pairing, NIRO / PTFE, maintenance-free

Higher pivoting angle through wider ball

» CAD Data

Size (D)	B	M	A	O	dK	Static load C_okN	Static load C_okN -2RS	Dynamic load C kN	Dynamic load C_okN -2RS	Pivoting angle α (°)	Weight g
04 0 -0,008	7	4	14 0 -0,008	7,1	10	9,1	-	3,6	-	20	5
05 0 -0,008	9	5	16 0 -0,008	9,3	13	14	-	5,8	-	21	8
06 0 -0,008	9	5	16 0 -0,008	9,3	13	14	-	5,8	-	21	9
08 0 -0,008	11	6	19 0 -0,009	11,6	16	21	-	8,6	-	21	14
10 0 -0,008	12	7	22 0 -0,009	13,4	18	28	-	11	-	18	21
12 0 -0,008	15	9	26 0 -0,009	16	22	45	-	18	-	18	33
15 0 -0,008	16	10	30 0 -0,009	19,2	25	56	75	22	32	16	49
17 0 -0,008	20	12	35 0 -0,011	21	29	78	104	31	45	19	83
20 0 -0,010	25	16	42 0 -0,011	25,2	35,5	127	204	51	85	17	153
25 0 -0,010	28	18	47 0 -0,011	29,5	40,7	166	263	65	110	17	203
30 0 -0,010	32	20	55 0 -0,013	34,4	47	211	338	84	140	17	304
35 0 -0,012	35	22	62 0 -0,013	39,7	53	262	419	104	175	16	408
40 0 -0,012	40	25	68 0 -0,013	44,7	60	337	540	135	225	17	542
45 0 -0,012	43	28	75 0 -0,013	50	66	415	665	166	275	15	713
50 0 -0,012	56	36	90 0 -0,015	57,1	80	-	1030	-	430	17	1420
60 0 -0,015	63	40	105 0 -0,015	67	92	-	1320	-	550	17	2090
70 0 -0,015	70	45	120 0 -0,015	78,2	105	-	1700	-	705	16	3010
80 0 -0,015	75	50	130 0 -0,018	87,1	115	-	2070	-	860	14	3610
90 0 -0,020	85	55	150 0 -0,018	98,3	130	-	2570	-	1070	15	5500
100 0 -0,020	85	55	160 0 -0,023	111,2	140	-	2770	-	1150	14	6040
110 0 -0,020	100	70	180 0 -0,025	124,8	160	-	4030	-	1680	12	9740
120 0 -0,020	115	70	210 0 -0,030	138,4	180	-	4530	-	1890	16	15100
140¹⁾ 0 -0,025	130	80	230 0 -0,030	151,9	200	-	5760	-	2400	16	18900
160¹⁾ 0 -0,025	135	80	260 0 -0,035	180	225	-	6480	-	2700	16	24800
180¹⁾ 0 -0,025	155	100	290 0 -0,035	196,1	250	-	9000	-	3750	14	35900
200¹⁾ 0 -0,030	165	100	320 0 -0,040	220	275	-	9900	-	4120	15	44900
220¹⁾ 0 -0,030	175	100	340 0 -0,040	243,6	300	-	10800	-	4500	16	50900
240¹⁾ 0 -0,030	190	110	370 0 -0,040	263,6	325	-	12870	-	5360	15	65300
260¹⁾ 0 -0,035	205	120	400 0 -0,040	283,6	350	-	15120	-	6300	15	82000
280¹⁾ 0 -0,034	210	120	430 0 -0,045	310,6	375	-	16200	-	6750	15	96600

Materials:
Insert:	Bearing steel to 100Cr6, with PTFE linder bonded to the inner surface
	From size 15 available sealed (-2RS) on both sides
	From size 20 only available sealed (-2RS) on both sides
Ball:	Bearing steel to 100Cr6, hardened, ground, polished, hard chrome plated
¹⁾ From size 120 the hardened inserts are two pieced and secured with tension spring

Spherical Plain Bearings - Extra Heavy Duty - Steel on Steel - Stainless

Series GXO..ICR (RR)

Spherical Plain Bearings with larger outside Ø, regreasable

For use at highest dynamic radial and axial pressure and tension loads
Vibration and impact resistant

» CAD Data

GXO-RR-MS-Drawing

Description	DH 7	B	M	A h6	O	Static radial load C_okN	Dynamic radial load C kN	Internal Clearance µm	Tilting angle α (°)	Weight g
GXO 8.22 ICR	8	12	9,00	22	10,4	60,7	7,1	5-20	14	23
GXO 10.26 ICR	10	14	10,50	26	12,9	85,2	9,9	5-20	13	38
GXO 12.30 ICR	12	16	12,00	30	15,4	113,5	13,0	5-25	13	58
GXO 14.34 ICR	14	19	13,50	34	16,8	146,0	17,0	5-25	16	83
GXO 16.38 ICR	16	21	15,00	38	19,3	182,5	21,0	5-25	15	115
GXO 18.42 ICR	18	23	16,50	42	21,8	224,0	26,0	5-30	15	150
GXO 20.46 ICR	20	25	18,00	46	24,3	268,0	31,0	31,0	14	200

Materials:
Insert:	Extra heavy-duty steel to 45S20, zinc plated
Ball:	Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated on the running surface

Description	DH 7	B	M	A h6	O	Static radial load C_okN	Dynamic radial load C kN	Internal Clearance µm	Tilting angle α (°)	Weight g
GXO 8.22 RR	8	12	9,00	22	10,4	30,4	3,5	5-20	14	23
GXO 10.26 RR	10	14	10,50	26	12,9	42,6	4,9	5-20	13	38
GXO 12.30 RR	12	16	12,00	30	15,4	57,0	6,5	5-25	13	58
GXO 14.34 RR	14	19	13,50	34	16,8	73,0	8,5	5-25	16	83
GXO 16.38 RR	16	21	15,00	38	19,3	91,0	10,5	5-25	15	115
GXO 18.42 RR	18	23	16,50	42	21,8	112,0	13,0	5-25	15	150
GXO 20.46 RR	20	25	18,00	46	24,3	134,0	15,5	5-30	14	200

Materials:
Insert:	Stainless steel to 1.4571, Aisi 316Ti
Ball:	Stainless steel to 1.4034, Aisi 420C, hardened, ground, polished

These high-performance bearings are a steel on steel design without PTFE liner. This spherical plain bearing has a reduced internal clearance and is not pre-loaded. Internal clearance: The radial internal clearance is the value with which the ball can be moved in radial direction from one cutoff point to the opposite. This Motor Sport steel on steel version is supplied ex factory with a first time lubrication with high-performance grease FLURO^® FE3752. This grease can be ordered from FLURO^®. Both series are also available with threaded bolt.

Spherical Plain Bearings Motor Sport - Stainless, maintenance-free

Series GE..FW-NIRO-MS

Spherical Plain Bearings, narrow series made from stainless steel running on PTFE, maintenance-free

For use at dynamic pressure and tension loads in corrosive environments and limited fitting dimensions

» CAD Data

Description	D	B	M	A	O	Static radial load C_okN	Dynamic radial load C_okN	Torque N/dm	Tilting angle α (°)	Weight g
GE 12 FW-NIRO-MS	12 0 -0,008	15	9	26 0 -0,009	14,9	50,0	30,0	8-18	18	16
GE 15 FW-NIRO-MS	15 0 -0,008	16	10	30 0 -0,009	18,4	65,0	39,0	10-20	16	26
GE 17 FW-NIRO-MS	17 0 -0,008	20	12	35 0 -0,011	20,7	90,5	54,0	12-22	19	38
GE 20 FW-NIRO-MS	20 0 -0,010	25	16	42 0 -0,011	24,2	159,0	96,0	18-28	17	61

Materials:
Insert:	Stainless steel to 1.4571, Aisi 316Ti, with PTFE liner bonded to the inner surface
Ball:	Stainless steel to 1.4125, Aisi 440C, hardened, ground, polished
Clearance:	Preloaded, zero tolerance

Page 15 of 210

Series GE..FW (-2RS)

Series GXO..ICR (RR)

Series GE..FW-NIRO-MS

Right Click