Gelenklager Gelenkköpfe Spherical Plain Bearings Rod Ends

FLURO-No. GIRSW 06R

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
13,1	9,3	530	27 / 0,059
nur für kurzzeitige Umdrehungen geeignet / only for short-term revolutions recommended

FLURO-No. GIRSW 05R

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
11,8	7,5	600	18 / 0,039
nur für kurzzeitige Umdrehungen geeignet / only for short-term revolutions recommended

Rod Ends Series K - Stainless - Maintenance-free

Series GIRSW..R

Rod Ends with female thread and PTFE liner

For use at high dynamic pressure and tension loads in corrosive environments

Materials:
Housing:	Stainless steel to 1.4057, Aisi 431, forged, polished Size 40 turned from stainless steel to 1.4057, Aisi 431
Insert:	Special high strength bronze to CuSn8 with PTFE liner bonded to the inner surface
Ball:	Stainless steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available on request in some sizes sealed (-2RS) or with threaded bolt (-BO).

Cetop connections see G-CETOP

¹⁾ Size 4 on request. Housing turned from stainless steel to 1.4305, Aisi 303

Please note: The dynamic load "C" of the bearing of some Rod Ends is in some sizes higher than the static load "Co" of the Rod End.

FLURO-No. GIRSW 04R

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
2,5	5,1		11 / 0,024
nur für kurzzeitige Umdrehungen geeignet / only for short-term revolutions recommended
Größe 4 rostfreier Stahl 1.4305, gedreht, auf Anfrage lieferbar / Size 4 on request. Housing turned from stainless steel to 1.4305, Aisi 303

Page 100 of 159