Gelenklager Gelenkköpfe Spherical Plain Bearings Rod Ends

FLURO-No. GARSW 06

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
8,8	9,3	530	20 / 0,044
nur für kurzzeitige Umdrehungen geeignet / only for short-term revolutions recommended

FLURO-No. GARSW 05

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
6,2	7,5	600	13 / 0,029
nur für kurzzeitige Umdrehungen geeignet / only for short-term revolutions recommended

Rod Ends Series K - Stainless - Maintenance-free

Series GARSW

Rod Ends with male thread and PTFE liner

For use at high dynamic pressure and tension loads in corrosive environments

Materials:
Housing:	Stainless steel to 1.4057, Aisi 431, forged, polished
	Size 40 turned from stainless steel to 1.4057, Aisi 431
Insert:	Special high strength bronze to CuSn8 with PTFE liner bonded to the inner surface
Ball:	Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated on the running surface

This series is also available on request in some sizes sealed (-2RS) or with threaded bolt (-BO).

¹⁾ Size 4 on request. Housing turned from stainless steel to 1.4305, Aisi 303

Please note: The dynamic load "C" of the bearing of some Rod Ends is in some sizes higher than the static load "Co" of the Rod End.

FLURO-No. GARSW 04

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
2,5	5,1		9 / 0,020
nur für kurzzeitige Umdrehungen geeignet / only for short-term revolutions recommended
Größe 4 rostfreier Stahl 1.4305, gedreht, auf Anfrage lieferbar / Size 4 on request. Housing turned from stainless steel to 1.4305, Aisi 303

Page 84 of 159