Gelenklager Gelenkköpfe Spherical Plain Bearings Rod Ends

FLURO-No. GIO 08

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
21,7	4,6	nicht für ganze Umdrehung geeignet not to be used for complete revolutions	46 / 0,10

FLURO-No. GIO 06

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
14,3	2,8	nicht für ganze Umdrehung geeignet not to be used for complete revolutions	27 / 0,06

Rod Ends Series K - Steel on Steel

Series GIO

Rod Ends with female thread without insert

High axial load in one direction only
To be used only with limited oscillating movements

» CAD Data

Size (D H7)	B	M	A	F	L	K	J	O	SW	G	GL	Static load C_o kN	Dynamic load C kN	Limiting speed rev/min	Pivoting Angle α (°)	Weight g
5	8	6	18	27	36	11	9	7,7	9	M 5	10	12	2,2	not to be used for complete revolutions	13	18
6	9	6,75	20	30	40	13	10	8,9	11	M 6	12	14,3	2,8		13	27
8	12	9	24	36	48	16	12,5	10,5	13	M 8	16	21,7	4,6		14	46
10	14	10,5	28	43	57	19	15	12,9	17	M 10	20	27,8	6,5		13	76
12	16	12	32	50	66	22	17,5	15,4	19	M 12	22	35	8,5		13	115
14	19	13,5	36	57	75	25	20	16,8	22	M 14	25	32,5	11		16	170
16	21	15	42	64	85	27	22	19,3	22	M 16	28	46	14		15	230
20	25	18	50	77	102	34	27,5	24,3	32	M 20x1,5	33	63	20		14	415

Materials:
Housing:	Up to size 12 turned, from free-cutting steel to 11SMn30+C, 12L13, turned galvanized
	From size 14 forged, from heat-treated steel to C22, M1023, galvanized
Ball:	Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished
Cetop connections see G-CETOP

The base in the steel housing is cylindrically turned from one side and, starting from the centre line, it runs to suit the ball's contour (see drawing).
Hence a high axial load towards the turned radius is possible.

This series is not regreasable through grease nipple.

FLURO-No. GIO 05

statische Tragzahl C_o kN static load C_o kN	dynamische Tragzahl dynamic load C kN	zulässige Drehzahl limiting speed rev/min	Stückgewicht gr. / lb. part weight gr. / lb.
12	2,2	nicht für ganze Umdrehung geeignet not to be used for complete revolutions	18 / 0,04

Page 64 of 159

Series GIO

Right Click