| Rod Ends Series K - Standard |
Series GI
Rod Ends with female thread regreasable through the housing with flush type grease fitting
» CAD Data |
 |
| Size (D H7) |
B | M | A | F | L | K | J | O | SW | G | GL | Static load Co kN |
Dynamic load C kN |
Limiting speed rev/min |
Pivoting Angle α (°) |
Weight g |
|
| 5 | 8 | 6 | 18 | 27 | 36 | 11 | 9 | 7,7 | 9 | M 5 | 10 | 9,9 | 2,5 | 900 |  |
13 | 18 |
| 6 | 9 | 6,75 | 20 | 30 | 40 | 13 | 10 | 8,9 | 11 | M 6 | 12 | 11,9 | 3,2 | 760 | 13 | 27 | |
| 8 | 12 | 9 | 24 | 36 | 48 | 16 | 12,5 | 10,4 | 13 | M 8 | 16 | 17,1 | 5,4 | 620 | 14 | 46 | |
| 10 | 14 | 10,5 | 28 | 43 | 57 | 19 | 15 | 12,9 | 17 | M 10 | 20 | 21,4 | 7,5 | 500 | 13 | 76 | |
| 12 | 16 | 12 | 32 | 50 | 66 | 22 | 17,5 | 15,4 | 19 | M 12 | 22 | 27 | 10 | 450 | 13 | 115 | |
| 14 | 19 | 13,5 | 36 | 57 | 75 | 25 | 20 | 16,8 | 22 | M 14 | 25 | 24,5 | 13 | 360 | 16 | 170 | |
| 16 | 21 | 15 | 42 | 64 | 85 | 27 | 22 | 19,3 | 22 | M 16 | 28 | 37 | 16 | 350 | 15 | 230 | |
| 18 | 23 | 16,5 | 46 | 71 | 94 | 31 | 25 | 21,8 | 27 | M 18x1,5 | 32 | 43 | 19,5 | 320 | 15 | 320 | |
| 20 | 25 | 18 | 50 | 77 | 102 | 34 | 27,5 | 24,3 | 32 | M 20x1,5 | 33 | 49,5 | 23,5 | 280 | 14 | 415 | |
| 22 | 28 | 20 | 54 | 84 | 111 | 37 | 30 | 25,8 | 32 | M 22x1,5 | 37 | 57 | 29 | 250 | 15 | 540 | |
| 25 | 31 | 22 | 60 | 94 | 124 | 42 | 33,5 | 29,6 | 36 | M 24x2 | 42 | 68 | 35 | 230 | 15 | 750 | |
| Materials: | |
| Housing: | Up to size 12 turned from free-cutting steel to 11SMn30+C, 12L13, galvanized |
| From size 14 forged from heat-treated steel to C22, M1023, forged, galvanized |
|
| Insert: | Special brass to CuZn38Al1 |
| Ball: | Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished |
| Cetop connections see G-CETOP | |