Rod End Bearing FPR 30 S

Rod End Bearing FPR 30 S

Article no. HHGIHOK30DO

Hydraulic rod end, fastened by hexagon socket head cap screw to DIN 912-8.8. spherical plain bearings, regreasable, fixed through caulking on both sides. For use in standard hydraulic cylinders 160 bar to ISO 6020/2.

All
Series: FPR..S
[D] Size: 30
[G] Thread pitch: M20x1,5
[A] Outer diameter (mm): 80
[B] Inner ring width (mm): 22
Temperature resistance: -50°C to +150°C
[M] Bearing width (mm): 19
[F] Medium length (mm): 85
[J] Diameter (mm): 36
[GL] Thread length (mm): 29
[L] Length (mm): 123
Internal clearance (μm): 37-100
[M1] Width (mm): 19
Dynamic load rating (kN): 62
Static load rating (kN): 108
[K] Collar diameter (mm): 77
Tilt angle (°): 6
Torque (Nm): 49
Type: Standard
Right/left thread: right-hand thread
Article Group: F503
Weight (g): 1250
Bearing shell: Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated, treated with molybdenum disulphide
Inner ring: Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated, treated with molybdenum disulphide
Housing: forged from heat-treated steel to C45, Aisi 1045
Lubrication: fitted with hydraulic grease nipples to DIN 71412